Alex Hossom Primo Flipper #2: Custom Flipper Care Basics

Start with the materials you are actually maintaining

The Alex Hossom Primo Flipper #2 is a custom flipper built from a Chad Nichols Boomerang Damascus blade, a blue and black Marble Carbon Fiber handle from Fat Carbon, titanium liners with an orange peel finish and custom anodization, and full Steve Kelly titanium hardware and pivots finished in anodized blue. The pocket clip is also Chad Nichols Boomerang Damascus. Because these are premium finishes and textured surfaces, your care routine should protect the look as much as the action.

The catalog describes the action as snappy and reliable, and the build as combining Damascus artistry with precision titanium work. That tells you what to preserve: a clean pivot, undamaged contact surfaces, and a handle that is not exposed to unnecessary abrasion.

What the catalog confirms about this Primo

• Alex Hossom Primo Flipper #2: Blade: Chad Nichols Boomerang Damascus with a high-contrast pattern. Damascus is a patterned steel; abrasive cleaning can dull the contrast you bought the knife for.

  

• Alex Hossom Primo Flipper #2: Handle: Blue and Black Marble Carbon Fiber from Fat Carbon, described as lightweight and durable. Carbon fiber resists moisture but can still be scratched or dulled by harsh cleaners, so gentle handling matters.
• Alex Hossom Primo Flipper #2: Liners: Titanium with a refined orange peel finish on the outside edges and custom anodization. Anodized titanium can be affected by abrasive polishes; clean without scrubbing the finish.
• Alex Hossom Primo Flipper #2: Hardware and pivots: Full Steve Kelly titanium hardware and pivots, anodized blue. The pivot is the heart of flipper action; keeping it free of grit protects the snappy deployment.

A simple routine for pivot and action care

The catalog does not supply a manufacturer maintenance schedule or disassembly instructions, so treat these as general good practices for a custom flipper rather than a factory procedure. If you are unsure, stop and seek professional guidance.

1. 1. Clear the path first: Before touching the pivot, wipe the blade and handle exterior with a soft, dry cloth. This removes loose dust and grit that could otherwise work into the pivot when you open the knife.
2. 2. Check the action before you lubricate: Open and close the Primo a few times. If the action feels gritty or inconsistent, the pivot may need cleaning rather than more oil. The catalog describes a snappy, reliable deployment, so a sudden change in feel is your signal to investigate.
3. 3. Use minimal lubrication at the pivot: A single small drop of a suitable folding-knife lubricant at the pivot is enough for most routine upkeep. Excess oil attracts dust and lint. The supplied information does not name a specific lubricant, so choose one intended for folding knives and follow its label.
4. 4. Work the action gently: After lubricating, open and close the knife several times to distribute the lubricant. Do not force the flipper or flick it aggressively; the goal is smooth distribution, not breaking in a new mechanism.
5. 5. Wipe away excess: Remove any lubricant that reaches the handle, liners, or blade with a clean dry cloth. This is especially important on the anodized titanium and carbon fiber, where excess oil can collect dust and dull the finish.

Cleaning Damascus and carbon fiber without ruining the finish

The Primo’s visual identity comes from the high-contrast Damascus pattern and the Marble Carbon Fiber handle. Keep cleaning gentle and avoid anything that abrades.

• Blade: Wipe the Damascus blade with a soft cloth. If needed, use a lightly damp cloth and dry immediately. Avoid abrasive pads, scouring powders, and harsh chemicals, which can scratch the surface and reduce the contrast of the pattern. The catalog does not provide a specific cleaning product, so test any cleaner on a small area first.
• Handle: Wipe the Fat Carbon handle with a soft, damp cloth and dry it. Do not soak the knife or use solvent-based cleaners that could affect the carbon fiber resin or the anodized finish. A dry microfiber cloth is usually enough for fingerprints and light smudges.
• Liners and hardware: Use a dry cloth or a soft brush to remove dust around the titanium liners and anodized hardware. Avoid metal polishes on anodized surfaces, as they can wear through the color. The orange peel finish on the liner edges is textured, so a soft brush can help lift debris without scratching.
• Pocket clip: The Damascus clip matches the blade, so treat it the same way: wipe gently and keep it dry. Avoid bending the clip unnecessarily.

Storage and handling habits that protect a custom flipper

Store the Primo closed, dry, and away from moisture. A padded pouch or a dedicated knife case reduces the chance of scratches from other items in a drawer. Because the catalog lists the condition as new from maker, keeping it clean and free of handling marks helps preserve that condition.

When you handle the knife, avoid touching the blade more than necessary; skin oils and moisture can sit on Damascus steel. Wipe the blade after handling if you have been sweating or if the environment is humid. The supplied information does not include a specific rust-prevention product, so use a product labeled for knife care and follow its instructions.

When to stop and get professional help

The catalog does not include disassembly instructions, torque values, or a manufacturer service schedule. If any of the following occur, pause and seek advice from a qualified knife maker or repair specialist rather than forcing a fix.

• Persistent gritty action: If cleaning and light lubrication do not restore smooth action, the pivot may need proper inspection. Do not overtighten or disassemble without guidance.
• Blade play or centering issues: A change in blade play or centering can indicate a loose pivot or worn component. The catalog does not supply adjustment specifications, so professional assessment is safer.
• Finish damage: If the anodized titanium or Damascus pattern becomes scratched or discolored, a specialist can advise on refinishing. Attempting to polish anodized surfaces yourself can make it worse.

Shipping and delivery: plan your care routine around it

This Primo ships from Canada. Tracking is typically available within 2–4 business days, and delivery is approximately 8–10 business days after tracking is provided. You will receive a confirmation email and a separate email with tracking information; check your spam folder if you do not see them. The cancellation and return policy is on the Terms and Conditions page. Knowing this timeline helps you plan: inspect the knife promptly on arrival, note any issues before use, and start your care routine only after you are satisfied with the condition.