Greg Lightfoot New LLC – 2: Custom Folder Handling and Care
By FABLADES | Your Trusted Store For EDC, Knives and Fidget | Published: 2026-11-04
Category: Tips & Care
Keep your Greg Lightfoot New LLC – 2 running smoothly with a simple care routine covering handling, pivot maintenance, and safe storage for this hand-built custom folder.
Quick answer
Treat your Greg Lightfoot New LLC – 2 like the hand-built custom it is: handle it with clean hands, keep the pivot lightly lubricated and free of grit, and store it closed in a dry, padded case. A short, consistent routine prevents most wear and keeps the action crisp.
Why this folder rewards a gentler routine
The New LLC – 2 pairs a tactical, overbuilt build with high-contrast dress materials, so it can handle real use but still shows handling marks more readily than a plain work knife. The hand-built construction in Canada means each example is a little individual; there is no mass-production parts bin to fall back on if something is damaged.
That is why the steps below favor prevention over repair. You will not find torque specs or disassembly instructions here because the catalog does not supply them, and a custom of this level is best kept assembled unless a maker or qualified repairer advises otherwise.
What to leave to a professional
Pivot maintenance on a custom flipper is not the same as on a production knife. If the action becomes gritty after cleaning and lubrication, or if the blade develops play, stop and seek professional service rather than adjusting screws blindly. The same applies to any cosmetic repair on the bolsters: the catalog describes a premium, high-visibility material set, but it does not specify the exact bolster material, so avoid abrasive polishes that could alter the finish.
Step-by-step care routine for the New LLC – 2
- Start with clean, dry hands: Wash and dry your hands before opening the knife, especially after eating or handling anything oily. Common mistake: flipping it with lotion or food residue on your fingers, which migrates into the pivot and attracts grit. Checkpoint: if the handle feels slick, wipe it down before you open the blade.
- Open and close deliberately: Use the flipper tab with a smooth, controlled motion and avoid wrist-flicking or dropping the blade open. Common mistake: repeated hard flipping to 'break in' the action, which accelerates wear on a hand-fitted pivot. Checkpoint: the blade should lock up solidly with no rattle; if it does not, stop and have it inspected.
- Wipe the blade after every use: After cutting, wipe the blade with a soft dry cloth and remove any tape residue or moisture before closing. Common mistake: closing a damp or sticky blade, which traps moisture and debris against the tang. Checkpoint: run a finger along the spine—if you feel grit or stickiness, clean it before storage.
- Brush and lightly oil the pivot: Every few weeks of regular carry, blow out or brush loose dust from the pivot area with a soft brush, then apply one small drop of a quality knife lubricant to the pivot and work it in by opening and closing a few times. Common mistake: over-oiling, which attracts lint and makes the action feel sluggish. Checkpoint: blot any excess oil with a cloth—the pivot should look barely damp, not wet.
- Store it closed in a dry, padded place: Keep the knife closed in a padded pouch or case, away from damp basements and direct sunlight. Common mistake: storing it open or loose in a drawer where it can knock against other items. Checkpoint: if you will not carry it for months, add a silica gel packet to the case and check it seasonally.
Product facts
- Greg Lightfoot New LLC – 2: Hand-built in Canada with a tactical overbuilt construction and high-contrast dress-folder materials. The combination of strength and visual finish means your handling habits should protect both the action and the appearance.
Greg Lightfoot New LLC – 2
